Composite Materials Practice Test

These questions are part of the practice quiz. Start practicing

• Why are ply drop locations planned and inspected in laminate design and manufacturing?
• A well-designed stacking sequence with gradual thickness transitions primarily helps to
• In CLT, which matrix is associated with bending stiffness and relates curvature to bending moments?
• Provide the 2D rule-of-mixtures expression for the in-plane shear modulus Gbar12 using iso-strain.
• The phrase blasting, propel dry abrasive, blast cabinet refers to which tool?
• What is the work center number for I level maintenance?
• In this material context, carbon is also known as which term?
• Define fiber volume fraction (Vf) and provide typical Vf values for carbon/epoxy laminates and their effect on stiffness.
• Which material typically offers a higher stiffness-to-weight ratio, CFRP or GFRP, albeit at a higher cost?
• When a load exceeds yield strength of a metal, what is the result?
• Which statement correctly characterizes Mode I and Mode II loading in interlaminar fracture?
• Which individual is credited with developing carbon fibers in the material context?
• Name three common reinforcing fibers used in composites and a brief trait for each.
• Hygrothermal aging in composites is best described as degradation due to:
• According to the material, carbon fibers were developed by whom?
• Which of the following is an advanced fiber listed for aircraft?
• What are the two main constituents of composite materials?
• Given Q11=150 GPa, Q12=0.28, Q22=7 GPa, Q66=3 GPa, theta=45°, compute Qbar11.
• Why are composites anisotropic?
• When a load exceeds the yield strength of a composite material, what occurs?
• Aramid Nomex is used on which aircraft components?
• What is the work center number associated with NDI?
• Which statement accurately describes composite usage in the F/A-18 and AV-8B?
• What is the difference between a lamina and a laminate in composite materials?
• What are typical values of Mode I and Mode II interlaminar fracture toughness values G_IC and G_IIC, and what do they signify?
• ACM is an acronym for what concept in composites?
• What is the common failure mode in a unidirectional CFRP under axial compression?
• Name a strategy to reduce delamination risk.
• What is the reported usage of composite materials for the F/A-18?
• For a given laminate in mixed-mode delamination, what generally governs the growth direction along the crack front?
• What is a ply in composite layup?
• How do impact testing and CAI testing differ for composites?
• Which modeling approach is commonly used to capture delamination growth in composites?
• Which component corresponds to grease fitting for lubrication?
• Repair of composite materials requires what?
• What is the expression for the local strain ε(z) at a distance z from the midplane in a typical laminated panel?
• Through-thickness reinforcement improves which aspect?
• Which applications are DuPont's Aramid Kevlar commonly used for in aircraft components?
• What are the two constituents of composite materials?
• Name two common manufacturing processes for fabricating composites and describe a typical advantage of each.
• A unidirectional composite has Vf = 0.6, Ef = 230 GPa, and Em = 3 GPa. Using the iso-strain rule, estimate E1.
• Carbon fibers are described as being used to manufacture what?
• What does RTM stand for and what characterizes the process?
• The typical ply thickness is expressed in which unit in this context?
• What are common signs of delamination in a laminate under load?
• What is Classical Laminated Theory used for?
• Voids in composites primarily affect which aspect of fatigue performance?
• What is the effect of ply orientation on the laminate's stiffness? Provide a concise explanation.
• Which of the following statements correctly describes a modeling approach to estimate G for delamination?
• Open-hole tension test reveals the effect of a circular hole on laminate strength and stress concentration.
• Boron fibers are characterized by which property?
• What is ILSS and how is it tested?
• DuPont's Aramid Kevlar is described as which of the following?
• How is interlaminar fracture toughness measured? Name two test configurations.
• What effect does ply misalignment during layup have?
• What stacking sequence strategy maximizes axial stiffness for a given load path?
• Which set correctly lists the Tg ranges for common matrix resins (epoxy, polyester, vinyl ester)?
• What is the purpose of a post-cure in epoxy resins?
• At the I level, composite repairs involve which activities?
• What is a typical fatigue failure mechanism in composite laminates, and how does it differ from metal fatigue?
• Define laminate mid-plane strain.
• What is a standard approach to estimate the in-plane shear modulus G12 of a laminate from ply data?
• HEPA filters are defined as which of the following?
• What does a fungus-proof coating do?
• What does short-beam shear testing measure?
• How do voids affect composite properties?
• What does a symmetric laminate imply for B-matrix coupling in laminate theory?
• Which action is associated with the term potting compound in protective contexts?
• If the diffusion coefficient D increases, what happens to the rate of moisture uptake in a laminate?
• What is the designation for the water displacement item?
• Which manufacturing process uses resin infusion under vacuum to impregnate fibers?
• Define Tg and explain how it changes with moisture in polymers used in composites.
• Compared with carbon fibers, aramid fibers generally offer
• Which action does the term fungus proof coating correspond to?
• How do you compute the energy release rate G for delamination growth in a laminated plate?
• Which Tg range is typical for vinyl ester resin?
• How do you compute laminate extensional stiffness A given Qbar_i and ply thickness t_i?
• Which curing approach yields the best consolidation and minimizes voids?
• What is Puck's criterion in brief and what failure modes does it consider?
• What is the effect of an antisymmetric laminate?
• The term potting compound corresponds to which action?
• Which statement is true about O level maintenance responsibilities for composite repairs?
• Which fiber type is described as having a high bending stiffness and being difficult to weave into cloth?
• Which expression correctly defines Qbar11 for a rotated lamina in terms of Q11, Q12, Q66, Q22 and m = cos theta, n = sin theta?
• Which fiber is typically chosen for its high toughness and impact resistance?
• The descriptor water displacement thing refers to which component?
• Among vinyl ester, polyester, and epoxy resins, which typically has the highest Tg range?
• Which of the following statements about Tg is consistent with typical thermoset carbon/epoxy systems?
• In Classical Laminates Theory, which matrix relates in-plane forces to midplane strains?
• Which of the following is a primary assumption of Classical Laminate Theory for a laminated plate?
• In laminated composites, what term describes the separation that can occur under overload?
• What are typical ply orientations used in layups?
• Which statement best describes the directional properties of composite materials?
• What is the effect of temperature on composites and how does it influence performance?
• Curing residual stresses arise from mismatch in cure-shrinkage and coefficients of thermal expansion between matrix and fibers during cure and cooling; what factors influence them?
• What is the purpose of transforming ply stiffness to Q_bar?
• What is prepreg?
• In many composites, E2 is much lower than E1.
• What does the Tsai–Wu failure criterion describe?
• Which of the following is a matrix material used in advanced composites?
• What does G_IC measure?
• Identify the three matrix materials used in aircraft composites.
• Which statement correctly describes the A matrix in CLT?
• As the fiber volume fraction approaches 1 in a unidirectional composite, the axial modulus E1 tends toward which modulus?
• Which of the following is the correct expression for Qbar66 in a 2D laminate transformation?
• How does laminate symmetry influence coupling between bending and extension?
• Which factor primarily dictates how quickly moisture diffuses through a laminate?
• Write the diffusion equation for moisture uptake in a laminate (Fick's law) and describe the meaning of D and M_inf.
• What does theta represent in the transformed stiffness Qbar when computing laminate properties?
• What is prepreg in composites?
• O level maintenance is performed by which work center number?
• State the Tsai-Hill failure criterion for an orthotropic lamina in plane stress.
• Nomex is used as a fire retardant in flight suits.
• At the O level, composite repairs are described as which of the following?
• Repair of composite materials requires which of the following?
• What is the purpose of adhesives in composites?
• Which formula describes laminate bending stiffness D?
• G12 represents which material property in a laminate?
• Which of the following is not a typical ply orientation?
• Which of the following is NOT listed as a matrix material for advanced composites?
• If the energy release rate G during delamination growth exceeds the critical value G_IC or G_IIC, what is the predicted outcome?
• Which component is most likely referenced by a button head, flush type fitting, hydraulic zerk when discussing lubrication?
• If a load exceeds the ultimate yield for a composite material, what occurs?
• Which statement best describes the typical fatigue damage modes in carbon/epoxy under high-cycle fatigue?
• If curvature κ is zero, the local strain ε(z) reduces to which quantity?
• Name at least three nondestructive evaluation techniques used for composites and what they detect.
• Post-buckling behavior of laminated plates is influenced by which factors?
• What do resin content and fiber volume fraction represent, and how are they typically measured?
• Identify the four advanced fibers used in aircraft composites.
• If a load exceeds the ultimate yield for metals, what happens?
• What environmental condition is commonly tested to assess moisture effects?
• Kevlar is described as which of the following?
• In fiber-reinforced composites, the matrix is defined as which of the following?
• NDI stands for what in maintenance terminology?
• Which term is a coating type distinct from encapsulation?
• How do you compute the transformed reduced stiffness Qbar for a lamina oriented at angle theta relative to the reference axes?
• What is the typical thickness per ply in the described composite material context?
• Why is Poisson's ratio important in composite design?
• What does the ABD matrix represent in Classical Laminated Theory?
• Which statement best describes the significance of G_IC and G_IIC in delamination?
• What is the function of a potting compound in protection of components?
• In a 2D laminate transformation, which of the following is the correct expression for Qbar11, given m = cos θ and n = sin θ?
• Which component corresponds to a button head, flush type fitting, hydraulic zerk?
• Which laminate characteristic introduces coupling between extensional and bending stiffness in Classical Laminated Theory?
• The process of transforming ply stiffness to Q_bar is used to account for what in laminate analysis?
• Prepreg is the basic building block of what?
• Aramid Kevlar systems are used in aircraft structures primarily in which way?
• In metals, how does strength vary with direction?
• Compare autoclave curing to room-temperature curing.
• Which statement correctly describes the typical advantage of CFRP over GFRP?
• Resin-rich zones at surfaces or interfaces can affect which property?
• The D matrix in laminate theory primarily governs which property?
• What causes resin-rich zones during cure?
• In classical laminate theory, symmetric stacking sequences primarily reduce coupling between bending and which response?
• Distinguish Mode I and Mode II delamination.
• How does temperature influence the mechanical properties of most thermosets?
• Which maintenance level involves evaluating damage and performing complex bolt-on repairs?
• In epoxy composites, Tg is defined as the temperature at which the resin transitions from glassy to rubbery.
• State the Tsai-Wu failure criterion for a lamina and give the standard coefficients F1, F2, F11, F22, F66, F12.
• What are the three main failure modes in composites under in-plane loading?
• Under in-plane loading of a laminated composite, which damage mode is specifically an interlaminar phenomenon?
• Interleaves in a lay-up are used to
• Which reinforcement fiber is noted for high toughness with moderate stiffness among carbon, glass, aramid, and basalt?
• Initial damage mechanism in UD CFRP under axial compression?
• How does low temperature affect stiffness and residual stresses in composites?
• Which term describes an item that would be associated with the action Encapsulate in protective coatings?
• What is a ply drop and why can it cause stress concentrations and delamination?
• Which statement best describes the difference between UD and woven fabrics in terms of in-plane stiffness and through-thickness behavior?
• Under overload beyond ultimate yield, which statement is true about metals and composites?
• What are carbon fibers used for in manufacturing?
• Name two common resin matrices used for high-performance composites.
• What is a disadvantage of composite materials?
• Which aircraft and structural areas use boron systems?
• Non destructive inspection describes what?
• In the 2D laminate transformation, what are m and n defined as?
• Define the rule of mixtures for the axial Young's modulus E1 in a unidirectional composite.
• What best defines advanced composite materials?
• How does ply orientation affect laminated stiffness in the in-plane axes?
• Which test configuration is typically used to assess interlaminar shear strength?
• Composite materials can be manufactured to have what characteristic?
• What is the reported usage of composite materials for the AV-8B?
• What is the typical fatigue failure mechanism in carbon/epoxy composites?
• Which strategy improves damage tolerance in composite laminates?
• Which item is the grease gun fitting among listed connectors?
• What is a common effect of moisture on thermoset composites?
• How does laminate thickness influence buckling behavior?
• What safety measure is recommended when working with composite matrix?
• Which description best matches the general properties of common reinforcement fibers such as carbon, glass, and aramid?
• Name a resin matrix known for high-temperature resistance used in aerospace applications.
• Which statement about increasing fiber volume fraction is most accurate?
• Which maintenance level is defined as type/model/series specific repairs?
• In lay-up composite manufacturing, what is the primary purpose of vacuum bagging?
• Provide the correct expression for Qbar66 in a rotated lamina: Qbar66 = ?
• What is the Tsai-Hill failure criterion?
• Which statement best describes the effect of cure cycle quality on void content in epoxy composites?
• How is E2 typically determined?
• Which term best describes encapsulating electronics in resin?
• Which reinforcement fiber typically has the lowest density?
• The term fungus proof coating corresponds to which action?
• Role of fillers in polymer composites?
• Which statement about the extensional stiffness matrix A in a laminate is true?
• What is interfacial shear strength (IFSS) and how is it measured?
• Which option best represents the action of encapsulation?
• In the ABD matrix, which component corresponds to bending stiffness?
• What is the purpose of a cure cycle in curing epoxy resins?
• What is a Z-ply and its purpose in through-thickness reinforcement?
• Which of the following is a stated use for DuPont Aramid Kevlar in aircraft components?
• Nomex is a synthetic aramid used primarily as a fire retardant material in flight suits. Nomex is most commonly used to protect which item?
• In Classical Laminate Theory, what do the A, B, and D matrices represent and what physical properties do they relate?
• Which material is a matrix material listed for aircraft composites?
• How does a symmetric laminate affect the B-matrix and coupling between bending and extensional responses?
• In carbon/epoxy laminates, how does increasing the fiber volume fraction Vf affect stiffness, strength, toughness, and processability?
• Carbon (graphite) fibers are made from which of the following?
• Which statement best describes a HEPA filter?
• Which statement best describes the typical in-plane shear performance of 0/90 laminates versus ±45 laminates?
• Which resin is predominantly used for adhesives in composites?
• Which item is used as a corrosion removal tool?
• Which statement best describes resin-rich regions relative to virgin resin in terms of mechanical performance?
• What is the general approach to determine delamination tendency in a laminated plate under load?
• The term conformal coating is typically associated with which protective action?
• Tailor laminates are best described as which of the following?
• Which component is described by the phrase 'water displacement thing'?
• What is the purpose of stacking sequence optimization in composite design?
• How does increasing fiber volume fraction affect stiffness along the fiber direction?
• Materials mixed in amounts of 40 grams or more may do what?
• Which non-destructive testing method is commonly used to locate delaminations in composites?
• RTM stands for Resin Transfer Molding and is characterized by resin being injected into a closed mold containing a dry fiber preform and cured under pressure. Which option best matches this statement?
• Which component is used to encapsulate devices in resin?
• How does 3D weaving affect through-thickness properties?
• In a ply oriented at angle theta, what is Q_bar?
• What is laminate mid-plane strain?
• In the midplane strain relation ε(z) = ε0 + z κ, what does ε0 represent?
• How does moisture uptake affect Tg and modulus in a graphite/epoxy laminate?
• In iso-strain (Voigt) and iso-stress (Reuss) models, what are the standard expressions for the longitudinal modulus E1 and the transverse modulus E2 using Vf and Vm?
• Which nondestructive evaluation technique is most effective for detecting porosity in composites?
• How does increasing laminate thickness affect bending stiffness and buckling load? Provide the scaling law.
• Why is the reduced stiffness Q_bar used for a ply in a laminate?